Best Flooring for Old Houses in Australia
Engineered timber, hybrid, vinyl or tile — what actually works in an old Australian house with timber subfloors, uneven joists…
Timber Flooring
-
-
Engineered Wood Flooring: Do You Need an Underlay?
Whether you need underlay for engineered wood flooring depends on subfloor and install method. Here is when underlay is essential,…
-
Topgrain Oak Timber Flooring Review
Our review of Topgrain Oak engineered timber: what the boards are like, what to check before buying, and how they…
-
Timbermax Matte Timber Flooring Review
Timbermax matte timber reviewed: how the matte finish performs, what the boards are like to live with, and comparable ranges…
-
Highcountry Herringbone Timber Flooring Review
Honest review of Highcountry herringbone engineered timber: construction, where the pattern earns its install premium, the colour range, and where…
-
Floating Floor vs Timber Floor: Key Differences for Your Home
Floating floor vs timber floor: how each is installed, how they feel underfoot, what they cost, and which suits a…
-
Laying Timber Flooring Over Tiles
Yes, you can lay engineered or hybrid timber flooring over existing tiles in Australia. Here’s how to check the subfloor,…
-
Choosing Between Herringbone and Straight Flooring
Herringbone or straight-lay? How the two patterns compare on cost, install time, room size and resale value, with Australian timber…
-
Is Blackbutt Good for Flooring?
Blackbutt is a hard, pale-honey Australian hardwood rated 9.1kN on the Janka scale. Where it excels as flooring, and what…
-
The Most Popular Engineered Wood Flooring Colours in Australia
The engineered timber colours Australians choose most: natural oak, blackbutt, greige and smoked browns, and how to pick one for…
-
What Happens When Engineered Wood Gets Wet?
What happens when engineered wood gets wet: swelling at the joins, cupping and delamination, how fast you must act, and…
-
Is Engineered Wood High Maintenance?
Engineered timber is low-maintenance if you treat it right. The weekly routine, what to avoid, and which finishes are easiest…