NFD Oakridge Hillside Oak – pale blonde oak hybrid flooring
Hillside Oak is the pale blonde oak colour in NFD’s Oakridge range. Oakridge is a 6.5mm rigid-core hybrid with a crystal-embossed, water-resistant surface and Uniclic® joints – strong, low maintenance and realistic. Hillside Oak is one of 8 colours in the range.
Why choose Oakridge Hillside Oak
- Waterproof rigid-core hybrid – will not swell or warp, so it can be laid throughout the home including kitchens, laundries and bathrooms.
- 0.5mm wear layer – built for pets, kids and high-traffic living areas.
- Quiet underfoot – pre-attached acoustic backing, AAAC 3 Star rated; no separate underlay needed.
- Uniclic® click installation – floats over most existing hard floors; no glue, fast installation.
- 20-year residential, 7-year commercial warranty from NFD (National Flooring Distributors).
Specifications at a glance
- Plank size: 1524 x 230mm
- Total thickness: 6.5mm
- Wear layer: 0.5mm
- Pack: 2.09m² (6 planks)
- Acoustic rating: AAAC 3 Star
- Surface: matte; micro-bevel edge
- Installation: floating, Uniclic® click
Full technical data is in the specification table on this page.
Where it works best
Because Oakridge is waterproof and hard wearing, Hillside Oak can run through open-plan living, kitchens, hallways, bedrooms and wet areas without a change of floor at doorways. Its light tone helps smaller or south-facing rooms feel larger and hides dust well.
Installation and care
Oakridge floats over concrete slabs, tiles, timber and existing sheet flooring that is flat, dry and clean. Planks click together with the Uniclic® system and need no glue, and the attached backing means no extra underlay. Sweep or vacuum regularly and damp-mop with a pH-neutral cleaner.
Buying Oakridge Hillside Oak from The Flooring Guys
We stock NFD flooring at trade-direct prices in Brisbane and Sydney with delivery Australia-wide. Order a sample to check the colour in your own light, or compare Hillside Oak with other hybrid flooring in our range. Need it laid? Ask us about supply and install.
Frequently asked questions
Can I install it in a bathroom?
Yes. The rigid core is waterproof, so it is suitable for bathrooms and laundries when installed to NFD’s guidelines.
Do I need underlay?
No. An acoustic backing is already attached to every plank.
How many cartons do I need?
Each carton covers 2.09m². Measure your room area, add about 10% for cuts and wastage, and divide by 2.09.












Reviews
There are no reviews yet.