NFD Daintree XL Tasmanian Oak – light warm Tasmanian oak engineered timber flooring
XL Tasmanian Oak is the light warm Tasmanian oak colour in NFD’s Daintree range. Daintree is NFD’s Australian-species engineered timber: a 2mm hardwood veneer on a 15mm engineered board with a brushed matte finish, in standard 136mm and XL 190mm widths. XL Tasmanian Oak is one of 3 colours in the range.
Why choose Daintree XL Tasmanian Oak
- Real 2mm wear layer – genuine timber that can be re-sanded and refinished later in life.
- Engineered core – far more stable than solid timber, so boards resist cupping and gapping through Australian seasons.
- Brushed matte finish – low-sheen, low-maintenance and ready to walk on straight after installation.
- 5G click or tongue-and-groove installation – float over underlay or glue down.
- 20-year residential, 5-year commercial warranty from NFD (National Flooring Distributors).
Specifications at a glance
- Board size: 1900 x 136mm (Daintree) or 1900 x 190mm (Daintree XL)
- Thickness: 15mm (2mm wear layer)
- Pack: 2.06m² or 2.17m² (6 planks)
- Finish: brushed matte; micro-bevel edge
- Installation: 5G click or tongue-and-groove
Full technical data is in the specification table on this page.
Where it works best
XL Tasmanian Oak suits living rooms, bedrooms, hallways and dining areas, and can be laid over most existing hard floors. Engineered timber is not recommended for bathrooms or laundries. Its light tone helps smaller or south-facing rooms feel larger and hides dust well.
Installation and care
Daintree floats over a flat, dry subfloor on underlay or is glued down. Sweep or vacuum regularly and clean with a well-wrung damp mop and a timber-floor cleaner; use felt pads under furniture and keep humidity moderate.
Buying Daintree XL Tasmanian Oak from The Flooring Guys
We stock NFD flooring at trade-direct prices in Brisbane and Sydney with delivery Australia-wide. Order a sample to check the colour in your own light, or compare XL Tasmanian Oak with other engineered timber flooring in our range. Need it laid? Ask us about supply and install.
Frequently asked questions
Is this real timber?
Yes. The top layer is 2mm bonded to an engineered core – the same wood as a solid floor, with far better stability.
Can it be sanded and refinished?
Yes. The 2mm wear layer allows refinishing over the life of the floor.
How many cartons do I need?
Each carton covers 2.06m². Measure your room area, add about 10% for cuts and wastage, and divide by 2.1.






Reviews
There are no reviews yet.