Godfrey Hirst Corsica Herringbone Weathered Oak – pale washed grey oak engineered timber flooring
Weathered Oak is a pale washed grey French oak. It suits Scandi and coastal interiors. Corsica Herringbone is the parquetry version of Corsica Oak: 600 x 125mm French oak blocks supplied in left- and right-hand sets for a classic herringbone floor. Weathered Oak is one of 4 colours in the range.
Why choose Corsica Herringbone Weathered Oak
- Real 3mm French oak wear layer – genuine timber that can be re-sanded and refinished later in life.
- multiply core – far more stable than solid timber, so boards resist cupping and gapping through Australian seasons.
- matte with light brushing – low-sheen, low-maintenance and ready to walk on straight after installation.
- tongue-and-groove, glued down installation – traditional joints for a solid, permanent floor.
- 25-year residential warranty from Godfrey Hirst, an Australian company since 1865.
Specifications at a glance
- Board size: 600 x 125mm
- Thickness: 14mm (3mm French oak wear layer)
- Core: multiply core
- Pack: 20 boards (10 left, 10 right), 1.5m² per box
- Finish: matte with light brushing; micro-bevel edge
- Slip resistance: P4 (AS 4586)
- Installation: tongue-and-groove, glued down
Full technical data is in the specification table on this page.
Where it works best
Weathered Oak suits living rooms, bedrooms, hallways and dining areas, and can be laid over most existing hard floors. Engineered timber is not recommended for bathrooms or laundries. Its light tone helps smaller or south-facing rooms feel larger and hides dust well.
Installation and care
Corsica Herringbone is glued or secret-nailed to a flat, dry subfloor. Sweep or vacuum regularly and clean with a well-wrung damp mop and a timber-floor cleaner; use felt pads under furniture and keep humidity moderate.
Buying Corsica Herringbone Weathered Oak from The Flooring Guys
We stock Godfrey Hirst engineered timber flooring at trade-direct prices in Brisbane and Sydney with delivery Australia-wide. Order a sample to check the colour in your own light, or compare Weathered Oak with other engineered timber floors in our range. Need it laid? Ask us about supply and install.
Frequently asked questions
Is this real timber?
Yes. The top layer is 3mm French oak bonded to a multiply core – the same wood as a solid floor, with far better stability.
Can it be sanded and refinished?
Yes. A 3mm wear layer allows at least one full re-sand over the life of the floor.
How many boxes do I need?
Each box covers 1.5m². Measure your room area, add about 10% for cuts and wastage, and divide by 1.5.
Reviews
There are no reviews yet.