Godfrey Hirst Chateau Oak White Sands Engineered Timber Flooring

Godfrey Hirst Chateau Oak White Sands – white-washed oak engineered timber flooring

White Sands is a white-washed European oak – the lightest colour in the collection. It makes rooms feel larger and suits Scandi interiors. This colour is from the earlier Chateau Oak collection: a 14mm European oak engineered board with a 2mm oak wear layer, 8-layer matte coating and tongue-and-groove joints.

Why choose Chateau Oak White Sands

• Real 2mm European oak wear layer – genuine timber that can be re-sanded and refinished later in life.
• engineered plywood core – far more stable than solid timber, so boards resist cupping and gapping through Australian seasons.
• 8-layer matte coating – low-sheen, low-maintenance and ready to walk on straight after installation.
• tongue-and-groove (float or nail) installation – traditional joints for a solid, permanent floor.
• 25-year residential warranty from Godfrey Hirst, an Australian company since 1865.

Specifications at a glance

• Board size: 1820 x 190mm
• Thickness: 14mm (2mm European oak wear layer)
• Core: engineered plywood core
• Pack: 6 planks, 2.08m² per box
• Finish: 8-layer matte coating; micro-bevel edge
• Slip resistance: P4 (AS 4586)
• Installation: tongue-and-groove (float or nail)

Full technical data is in the specification table on this page.

Where it works best

White Sands suits living rooms, bedrooms, hallways and dining areas, and can be laid over most existing hard floors. Engineered timber is not recommended for bathrooms or laundries. Its light tone helps smaller or south-facing rooms feel larger and hides dust well.

Installation and care

Chateau Oak is glued or secret-nailed to a flat, dry subfloor. Sweep or vacuum regularly and clean with a well-wrung damp mop and a timber-floor cleaner; use felt pads under furniture and keep humidity moderate.

Buying Chateau Oak White Sands from The Flooring Guys

We stock Godfrey Hirst engineered timber flooring at trade-direct prices in Brisbane and Sydney with delivery Australia-wide. Order a sample to check the colour in your own light, or compare White Sands with other engineered timber floors in our range. Need it laid? Ask us about supply and install.

Frequently asked questions

Is this real timber?
Yes. The top layer is 2mm European oak bonded to a engineered plywood core – the same wood as a solid floor, with far better stability.

Can it be sanded and refinished?
Yes. A 2mm wear layer allows at least one full re-sand over the life of the floor.

How many boxes do I need?
Each box covers 2.08m². Measure your room area, add about 10% for cuts and wastage, and divide by 2.08.